If you encounter a Canon B200 Error on your printer display after turning it on and selecting a file to print, the device is facing some serious problems. This can be an issue if you rely heavily on printing documents daily.
To fix the Canon printer B200 error, start by determining what is causing it. This guide can assist in resolving the issue. When you have this error, your printer cannot finish its job. You can also find the solution for Canon G3010 printer is not printing
Methods for Resolving the Canon B200 Error
- Reset the printer.
- Remove any obstructions.
- Clean the printer head.
- Clean the print head by hand.
- Remove old ink.
- Reinstall the printer drivers.
- Install a new ink cartridge.
- If all steps followed by you, the B200 error will be fix.
What causes the Canon Printer B200 error?
The B200 error is generally due to cartridge malfunctions, some of which are listed below;
- Cartridges are dried up
- Cartridges are jammed
- Replica ink cartridge
- The waste container is at capacity.
- Damaged ink cartridge
- Overheating
How to Fix B200 error on a Canon printer?
Start by resetting your printer. If the problem persists, explore other options.
Option 1: Rebooting the Canon Printer model
A reset process can sometimes be a useful solution for errors on certain printer models, though there is no guarantee. To reset a Canon printer, follow these steps:-
- Shut down your Canon printer.
- Hit the Stop button and wait approximately 2 seconds.
- Now, you have to press the ON button.
- When the alarm light comes on, press and hold the ON button.
- Release the Stop button.
- Please press the Stop button five times again.
- Press and hold the ON button, then let go of both the Stop and ON buttons.
- The Canon printer is powering down.
- Allow the printer to cool for one to two hours, then restart it.
- To try and resolve the B200 error, attempt to print your document.
Option 2: Clean the Canon Printer Head.
- Open printer driver setup.
- Hit on maintenance.
- Click Clean.
- Choose a type of ink from the Print Head Dialog box.
- Hit execute.
- Cleaning should start now.
- Later, you’ll open the Nozzle Check dialog box and select Print Check Pattern.
If you’re still getting the B200 error, remove the cartridge, unfasten the print head, and clean it with a warm cloth dipped in water.
Option 3: Change the Ink Cartridges
Before changing out a dry or faulty Ink Cartridge, keep in mind the following tips:
- Avoid getting the cleaning cloth and your hands dirty when using the printer.
- Take care when replacing the cartridge, and be sure not to touch any metal or internal components of the machine.
- Do not interrupt or touch a cartridge that is in motion.
- Handle the cartridge gently to avoid applying too much force.
To change or reset the ink cartridge, follow these steps:
- Make sure the Canon printer is switched on.
- Now, lift the top cover of the printer.
- To open the output cover, remove the paper and turn it out.
- To take the cartridge out of the printer, push it downwards.
- Place the new cartridge in its holder.
- Insert the cartridge until it is securely in place.
Option 4: Reset or update the Canon Printer Driver.
If all other strategies fail to solve your printer’s B200 error, it could be a software issue. To remedy this, reinstall or update the driver from canon.com/ijsetup or ij.start.canon
Although many of these solutions fixed the Canon B200 error on a Canon printer, the best choice is to replace the printer.